Turnigy AquaStar 120A Water Cooled ESC
Ultra fast microprocessor controlled and extremely low resistance circuit and chip design, water-proof PCB, and aluminum water-cool heatsink for better thermal dissipation are just some of the features in the new TURNIGY Aquastar range of brushless boat speed controllers.
The AquaStar brushless esc is a high performance ESC capable of standard and competition use.
Full protection, include signal loss, temperature, and motor jam protection. Programable by USB on a PC or by your Tx.
Compatible to use with all radio systems.
Programmable settings;
Startup (Soft/normal/hard)
Low Voltage cutoff (Default 6V, 5.0/6.0/7.2/8.4/9.0/12.0/15.0/18.0V)
Brake: (None/Soft)
PWM rate (8/12/16 KHz)
Timing (Low/Middle/High/Auto)
Throttle range: 640uS
Spec.
Constant Current: 120A
Burst Current: 150A
Battery: 2-6S Lipoly
BEC: 3.5A/5v switching BEC, max 4A
Motor Type: Sensorless Brushless
Size: 90 x 36 x 20mm
Weight: 100g
MosFET type: IR
We suggest customers to not program the esc with their Tx.
Turnigy Marine 120A Brushless Boat ESC
TURNIGY marine ESCs are built with USA IR mosFETs for long run times and less heat.
Boat escs have a different requirement to air or car escs. Their need for sustained high-amp draw makes plane escs unsuitable and car escs with large amp spike capability, unnecessary.
Thats why TURNIGY marine escs are designed purely for boats, and coated in anti-static then water resistant laquer to prevent shorting should the esc get wet. They can handle sustained high amp/volt loads and handle heat better than a car or plane esc.
What makes this ESC better than others?
-Well designed MCU, with efficient code makes for faster sync and accurate timing.
-Fast clock cycle MCU combined with efficient code means 100,000rpm cpu cycle*
-Efficient FETs reduce heat and deliver sustained switching at high amp/voltage.
-Well designed PCB (6 layer) and circuit diagram handles high-amp without burnout.
-Large motor comptability. Smooth starts, linear throttle curve.
-Active water cooled heatsink that actually works.
Programmable settings;
Reverse
Low Voltage (none/2.8v/3v/3.2v/3.4v)
Brake: (none/soft/hard)
Timing (0.00/3.75/7.50/11.25/15.00/18.75/22.50/26.25)
Constant Current: 120A
Burst Current: 240A
Resistance: .0007ohm
Battery: 2-6S Lipoly
BEC: 3A/6v
Motor Type: Sensorless Brushless
Size: 94 x 33 x 18mm
Weight: 91g
*Speed: 100,000+rpm(2 Pole)